Professional Disinfection & Antiviral Sanitisation Services Scotland

The technical core of every disinfection visit. High-touch surfaces are the primary cross-contamination vectors in any commercial facility — doorknobs, handrails, lift buttons, light switches, shared keyboards, and payment terminals see hundreds of touches per day and accumulate dangerous pathogen loads within hours. We follow a targeted protocol: identify the touchpoint map, pre-clean visible soil, then apply EN 14476 virucidal chemistry with the verified 60-second contact time.

• Thorough Wipe Downs— Meticulous cleaning of all doorknobs, handrails, lift buttons, and light switches. Every high-touch surface is pre-wiped with a general cleaner to remove organic soil (which deactivates most disinfectants on contact), then treated with EN 14476 virucidal wipes with a verified 60-second contact time. Door handles and push plates on both sides of every door. Lift call buttons and in-car floor buttons. Stair handrails the full length. Light switches and socket switches. Reception desk counters and pen holders. The touchpoint map is documented and replicated every visit.
• Workstation Sanitisation— Deep cleaning of desks, phones, and peripherals to reduce the risk of cross-contamination in shared offices. Desk surfaces wiped with EN 1276 bactericidal chemistry. Phone handsets and headsets disinfected (the highest pathogen load on any desk — typically 25,000 CFU per square inch). Keyboards and mice damp-wiped with alint-free cloth and alcohol-free virucide (alcohol damages keyboard coatings). Monitor frames and stands wiped. Chair armrests disinfected. Hot-desk stations get a full turnover disinfection between users. Shared meeting-room controllers, presentation clickers, and video-conference touch panels disinfected after every booking.
• Equipment Decontamination— Specialized cleaning for factory production lines, supermarket trolleys, and shared electronic terminals. Factory production-line touchpoints (control panels, conveyor handrails, tool handles) disinfected with food-safe EN 1276 chemistry. Supermarket trolley handles and basket grips disinfected (the single highest-cross-contamination surface in retail — we offer a trolley-park fogging station). Shared electronic terminals (self-checkout touchscreens, card readers, PIN pads) wiped with a non-alcohol virucide that does not damage the anti-glare coating. Gym equipment grips and weight-machine adjustment pins disinfected. The equipment-specific touchpoints that generic cleaners miss.

Beyond the touchpoints you can see, pathogens accumulate on surfaces you can’t reach with a cloth — ceiling voids, under-desk cable runs, behind equipment, inside air-conditioning grilles. Our environmental sanitisation protocol uses electrostatic and fogging technology to achieve full-room coverage, then addresses the floor and washroom zones that standard cleaning leaves behind.

• Disinfectant Spraying & Fogging— Utilizing electrostatic fogging technology to reach the “unreachable” areas and provide full-room coverage. Electrostatic spraying charges the disinfectant droplets so they wrap around surfaces — front, back, underside, and crevices — treating a 200m² office in 25 minutes. ULV (ultra-low-volume) fogging produces a fine mist that penetrates every surface in a sealed room — the method of choice for outbreak response, since it treats areas spraying can’t reach (under desks, behind equipment, into ceiling voids). Room sealed for 60-minute contact time, then aired for 30 minutes before re-entry. Chemistry is HSE-approved, food-safe, and dries residue-free in 8 minutes.
• Floor & Carpet Restoration— Using industrial-grade equipment to remove pathogens from high-traffic floor surfaces that standard recurring home cleaning might miss. Hard floors machine-scrubbed with EN 1276 bactericidal solution (the floor is the largest surface in any room and accumulates pathogens from every shoe). Carpeted zones hot-water-extracted with a sanitising pre-spray (carpet traps pathogens in the fibre matrix — vacuuming alone does not remove them). Entrance matting deep-cleaned (the first 3 metres of matting captures 80% of foot-borne contamination). Floor drains treated with enzymatic biocide. The floor work that separates a “spray-and-go” from a genuine environmental reset.
• Washroom Deep Sanitation— Intensive sanitation of all facilities, including buffing chrome and disinfecting all ceramic items to a high shine. Toilets descaled with a non-abrasive acid, disinfected with EN 1276-certified bacteriacide. Chrome fittings (taps, flush handles, door furniture) polished to a streak-free shine. Mirrors squeegeed. Sanitary bins checked, emptied, and replaced. Floors mopped with a slip-resistant sanitiser. Washroom ventilation grilles vacuumed and damp-wiped (a neglected pathogen reservoir). The washroom is the highest-risk zone in any commercial facility — we treat it that way.

The perimeter work that separates a “disinfection spray” from a genuine biological reset. Skirting boards, door frames, ventilation grilles, and internal glazing are the surfaces that generic contractors skip — and the surfaces that harbour the dust and biofilm that pathogens colonise between visits. We detail them as standard.

• Visible Skirting Boards & Vents— Our cleaners meticulously wipe all skirting boards, door frames, and ventilation grilles to ensure no dust traps remain. Skirting boards hand-wiped the full perimeter (the dust that accumulates here is a biofilm reservoir that recontaminates freshly-disinfected surfaces within hours). Door frames detailed top-to-bottom. Ventilation grilles vacuumed with a HEPA crevice tool then damp-wiped with EN 1276 bactericidal solution (airborne pathogens recirculate through dust-loaded grilles). Light-switch backplates detailed. Ceiling light diffusers dusted with an anti-static cloth. The perimeter work your facilities manager notices first on the snagging walk — included as standard, never as an upsell.
• Inside Window Care— Meticulous cleaning of internal glazing and partitions to maintain a bright, healthy atmosphere. Internal glass partitions squeegeed with pure de-ionised water (no chemical haze, no streaks). Internal windows cleaned the same way. Glass door panels and vision panels polished. The psychological impact of bright, clean glass in a disinfected space is significant — staff and visitors perceive the space as genuinely safe, not just chemically treated. UV-C cabinet treatment available for items that can’t be liquid-treated (laptops, tablets, books, soft toys, headphones, remote controls) — particularly useful in schools, nurseries, and dental practices.